Qualification Part Search

Company Location Information

Company Level Information CMC Electronics Incorporated (CAGE Code:90073)
600 Dr. Frederik Philips Boulevard, Ville Saint Laurent, Quebec, H4M 2S9, Canada

Company Contact: Mr. Luc-Albert Laroche,Phone: 514-748-3000 x4136,Fax: 514-748-3100
Land and Maritime Contact:Phone: 614-692-6826, Fax: 614-693-1658, E-mail: vqh.cj@dla.mil

Quality Management (QM) Program:Non-TRB
Periodic Inspection System:Options 1 and 2
ISO 9000 System:

Technologies:Voltage Regulator

Class Level Information See Note 6/ Classes: Class H, Class E

Qualification Letters: EQ(EQC-91-720),EQ(EQC-92-427),VQ(VQH-98-0133),VQ(VQH-17-031465),VQ(VQH-04-005582)

Substrate Fabrication Information See Note 1/ Substrate Fabrication Flows: 411-146425-000
Substrate Fabrication: Thick Film on Alumina, 7 Conductor Level(s), Resistors

Assembly Information See Note 1/ Assembly Flows: 411-146426-000
Substrate Attach: Nonconductive Epoxy,Conductive Epoxy
Element Attach: Eutectic,Nonconductive Epoxy,Conductive Epoxy
Add-on Elements: Unpackaged Die,Chip Capacitors,Chip Resistors
Wire Bonding: Gold

Package Information See Note 1/ 2/ 3/ Packages: Metal Package, Axial Leads, Seam Weld, 3.61 Seal Perimeter, 16 Leads, Gold Lead Finish; Metal Package, Bathtub, Seam Weld, 4.30 Seal Perimeter, 24 Leads, Gold Lead Finish; Metal Package, Flatpack, Seam Weld, 1.56 Seal Perimeter, 44 Leads, Gold Lead Finish

Notes

Notes:

1/ The QML listing can be expanded provided appropriate qualification testing is performed and passed. Therefore the manufacturer may accept an order for compliant product not covered by his QML listing, but shall not ship the compliant product until the testing has been successfully completed.

2/ Package seal perimeter is listed by largest perimeter successfully tested in inches.

3/ Package lead counts are listed by maximum number of leads covered by qualification.

6/ Class E devices are devices, which meet all of the requirements of one of the other classes (K, H, or G), with some exceptions taken. Therefore any manufacturer qualified to G, H or K is eligible to produce and mark product as compliant to class E.